JAMB LINER Assembly SUper H/D Brown Clutch TILT PAC Double Hung D/H & Single Hung S/H 20" to 32" Lengths


MARVIN Wood and Clad TILT PAC Double Hung D/H & Single Hung S/H JAMB Hardware Assemblies
SUPER HEAVY DUTY (BROWN CLUTCH) Glass Height (one sash) Part Numbers White Part Numbers Beige 20" Pair 22" 10606120 10606122 10606020 10606022 24 24/36" 10606124 10606125 10606024 10606037 26 38 10606126 10606128 10606026 10606028 30 32 10606130 10606132 10606030 10606032 34 36 10606134 10606136 10606034 10606036 38 40 10606138 10606140 10606038 10606040 42 44 10606142 10606144 10606042 10606044 46 48 10606146 10606148 10606046 10606048 * Glass height of top sash 24. Glass height of bottom sash 36. (all clutches brown)

ORDERING REPLACEMENT JAMB HARDWARE FOR E?ZTILT DH/SH TILT PAC (ALSO USED ON DOUBLE HUNG UNITS MANUFACTURED BEFORE APRIL OF 1986.) - Replacement jamb hardware assemblies complete include a pair of clip mount vinyl jamb liners, jamb liner foam, foam plugs, foam gaskets, pile weather strip, adhesive backed foam block, sash stops, installation clips, S?hooks and balance tubes. NOTE: Jamb liners must be ordered in pairs; Jamb Hardware Assemblies Complete for standard Tilt Pacs may be ordered by part number. See charts below. Jamb Hardware Assemblies complete for special Tilt Pacs, please include the following information: 1. Provide any original order numbers if available. 2. Specify type of Tilt Pac, (DH or SH). 3. Specify clip mount. 4. Specify color of liner (beige or white). 5. Provide length (see dimension A) ir glass height (s). 6. Provide balance size(s)* The balance size is imprinted on the tube, (see illustration). 7. Provide sill bevel. (Standard bevel is 14 Degrees ). NOTE: Special bevel jamb liners are shipped long to be trimmed in the field. * If the balances are oversized, a balance size may not be available. In this case, provide the glass width, height and makeup.

Tags: